CNC Machinist Calculator UltraHome › G-codes › Brother Speedio › G10
G10 Programmable data input
Brother Speedio G-code · Mill
Writes offsets or work coordinate values from the program. Often used to set work offsets or tool offsets automatically.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
G10 L P X Y Z or G10 L P R
Addresses
| Address | What it does |
|---|---|
L | Type of data, such as L2 for work offset |
P | Offset or work coordinate number |
X Y Z | Values to write |
R | Offset value for tool data |
How it works
Non-modal.
Example program
G90 G10 L2 P1 X-10. Y-5. Z-12. (SET G54 VALUES)
G00 G54 X0 Y0 (USE NEW G54)
G43 H01 Z1. (APPROACH)
G00 G54 X0 Y0 (USE NEW G54)
G43 H01 Z1. (APPROACH)
Example is in inch. Check offsets and clearances first.
Watch out for
- L numbers and the offset table layout on Brother can differ from Fanuc. Check the manual before writing tool data.
- G90 writes the value, G91 adds to the existing value.
Related codes
G10 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Programmable data input, offsets |
| Haas NGC | Programmable offset setting |
| Mazak (EIA) | Program data setting, offsets |
| Okuma OSP | Cancel coordinate shift and rotation |
| Mitsubishi M70 M80 | Program data input for offsets |
| Heidenhain TNC (ISO) | Rapid straight line, polar |
| Fagor 8055 8065 | Mirror image cancel |
| Mach3 Mach4 | Set offsets from the program |
| Centroid CNC12 Acorn | Set parameter or offset from program |
| Hurco WinMax (NC) | Data setting, offsets by program |
| Fadal | Programmable data input |
Every G-code for Brother Speedio in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G10 in the app All Brother Speedio G-codes