CNC Machinist Calculator UltraG11 Cancel programmable data input mode
Fanuc G-code · Mill and lathe
Ends the parameter or pitch error data input mode started with G10 L50 or G10 L52. Ordinary offset setting with G10 L2 or L10 does not need it.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
G11
How it works
Cancels the G10 L50 or L52 data input mode.
Example program
G10 L50 (PARAMETER INPUT MODE ON)
N1401 R0 (EXAMPLE PARAMETER LINE, CHECK MANUAL)
G11 (PARAMETER INPUT MODE OFF)
N1401 R0 (EXAMPLE PARAMETER LINE, CHECK MANUAL)
G11 (PARAMETER INPUT MODE OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- Writing parameters from a program can make the machine unsafe. Only do it with the builder procedure.
- Forgetting G11 after G10 L50 leaves the control reading data blocks as parameter data.
Related codes
G11 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Okuma OSP | Coordinate parallel shift and rotation |
| Heidenhain TNC (ISO) | Straight line at feed rate, polar |
| Fagor 8055 8065 | Mirror image on X |
| Hurco WinMax (NC) | Data setting mode cancel |
Every G-code for Fanuc in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G11 in the app All Fanuc G-codes