CNC Machinist Calculator UltraG23 Stored stroke check off
Fanuc G-code · Mill, Lathe
On mills: Stored stroke check off
Turns off the program set protected zone from G22. The normal axis limits stay active.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
How it works
Modal, group 04.
Example program
G23 (ZONE OFF)
G00 X-8. (MOVE INTO FORMER ZONE)
Example is in inch. Check offsets and clearances first.
Watch out for
- Give G23 in its own block.
- Only the G22 zone is turned off. Stored stroke limit 1, the normal travel limit, stays on.
On lathes: Stored stroke check off
Turns off the programmed forbidden area set by G22.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
How it works
Modal, group 09.
Example program
G00 X1. Z-5. (MOVE INTO PROTECTED ZONE)
G22 X6. Z-4. I-6. K-6. (CHECK BACK ON)
Example is in inch. Check offsets and clearances first.
Watch out for
- Put G23 on its own line.
- Turn the check back on with G22 after the special move.
Related codes
G23 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Okuma OSP | Programmable travel limit cancel |
| Brother Speedio | Stored stroke check off |
| Centroid CNC12 Acorn | Work envelope off |
Every G-code for Fanuc in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G23 in the app All Fanuc G-codes