G35 Automatic tool diameter measurement

Haas NGC G-code · Mill

Measures the cutter diameter with the probe system and writes it to the D offset. Needs the optional probing system with a reference set by M75.

Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.

Format

G35 D [X Y] F

Addresses

Address	What it does
`D`	Diameter offset number to write
`X Y`	Axis to move along for the measurement
`F`	Feed rate

How it works

Non-modal, group 00.

Example program

T3 M06 (TOOL TO MEASURE)
M75 (SET G35 REFERENCE POINT)
G35 D03 X.25 F5. (MEASURE DIAMETER INTO D03)

Example is in inch. Check offsets and clearances first.

Watch out for

Requires the probing option. Many shops now use the WIPS probing macros instead.
Run M75 first to set the reference point the measurement is based on.

Related codes

G37 · G36

Every G-code for Haas NGC in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.

Open G35 in the app All Haas NGC G-codes

App Store Google Play