CNC Machinist Calculator UltraHome › G-codes › Haas NGC › G80
G80 Canned cycle cancel
Haas NGC G-code · Mill, Lathe
On mills: Canned cycle cancel
Cancels the active canned cycle so later positioning moves do not drill holes.
Format
G80
How it works
Modal, canned cycle group 09.
Example program
G81 G99 Z-.5 R.1 F10. (DRILL)
X2. (NEXT HOLE)
G80 G00 Z1. (CANCEL AND RETRACT)
X2. (NEXT HOLE)
G80 G00 Z1. (CANCEL AND RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- G00 or G01 also cancels a canned cycle, but writing G80 is clearer.
- Put G80 in the safe start line.
On lathes: Canned cycle cancel
Cancels the active drill, tap or bore cycle. G00 or G01 also cancel canned cycles.
Format
G80
How it works
Modal, group 09.
Example program
G83 Z-1. Q.25 R.1 F.004 (PECK DRILL)
G80 (CANCEL CYCLE)
G00 Z.5 (RETRACT)
G80 (CANCEL CYCLE)
G00 Z.5 (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- Always cancel a hole cycle before moving to the next tool, or the next X or C move can drill again.
Related codes
G80 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Canned cycle cancel |
| Mazak (EIA) | Canned cycle cancel |
| Okuma OSP | Fixed cycle cancel |
| Mitsubishi M70 M80 | Canned cycle cancel |
| Brother Speedio | Canned cycle cancel |
| Heidenhain TNC (ISO) | Tilt the working plane |
| Fagor 8055 8065 | Canned cycle cancel |
| LinuxCNC Tormach | Cancel canned cycle |
| Mach3 Mach4 | Canned cycle cancel |
| Centroid CNC12 Acorn | Canned cycle cancel |
| Hurco WinMax (NC) | Canned cycle cancel |
| Fadal | Fixed cycle cancel |
| Swiss (Citizen Star) | Drilling cycle cancel |
Every G-code for Haas NGC in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G80 in the app All Haas NGC G-codes