CNC Machinist Calculator UltraHome › G-codes › Hurco WinMax (NC) › G03.4
G03.4 3D circular move CCW
Hurco WinMax (NC) G-code · Mill
Cuts a 3D arc through an intermediate point to an end point, in two blocks. Same as G02.4; the control finds the direction.
Format
G03.4 X Y Z then X Y Z
Addresses
| Address | What it does |
|---|---|
X Y Z first block | Intermediate point on the arc |
X Y Z second block | Arc end point |
F | Feed rate |
How it works
Modal, group 01. Replaced by G00, G01, G02, G03 or a canned cycle.
Example program
T1 M06 (.250 BALL MILL)
G90 G54 G00 X0. Y0. S6000 M03 (START POINT)
G43 H01 Z1. (LENGTH OFFSET)
G01 Z0. F5. (FEED TO START)
…
G90 G54 G00 X0. Y0. S6000 M03 (START POINT)
G43 H01 Z1. (LENGTH OFFSET)
G01 Z0. F5. (FEED TO START)
…
The full 7-line example is in the app. Example is in inch. Check offsets and clearances first.
Watch out for
- The second block must follow right after the first. Do not put other moves between them.
- No cutter compensation with 3D arcs.
Related codes
Every G-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G03.4 in the app All Hurco WinMax G-codes