CNC Machinist Calculator UltraHome › G-codes › LinuxCNC Tormach › G10 L11
G10 L11 Set tool offset from fixture G59.3
LinuxCNC Tormach G-code · Mill and lathe
Like G10 L10, but the offset is measured against the G59.3 system. Used with a fixed tool setter.
Format
G10 L11 P [X] [Y] [Z] [R] [I] [J] [Q]
Addresses
| Address | What it does |
|---|---|
P | Tool number |
X Y Z | Value the current position should read in G59.3 |
R I J Q | Optional radius, angles and orientation |
How it works
Non modal.
Example program
G20 G17 G40 G49 G54 G80 G90 G94 (INCH, SAFE START)
T3 M6 (TOOL OVER THE SETTER)
(JOG TOOL DOWN ONTO THE SETTER, THEN)
G10 L11 P3 Z0 (SETTER TOP IS Z0 IN G59.3)
…
T3 M6 (TOOL OVER THE SETTER)
(JOG TOOL DOWN ONTO THE SETTER, THEN)
G10 L11 P3 Z0 (SETTER TOP IS Z0 IN G59.3)
…
The full 5-line example is in the app. Example is in inch. Check offsets and clearances first.
Watch out for
- G59.3 must be set up as the tool setter or fixture origin.
- G52 and G92 offsets are ignored for this calculation.
Related codes
Every G-code for LinuxCNC Tormach in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G10 L11 in the app All LinuxCNC Tormach G-codes