CNC Machinist Calculator UltraHome › G-codes › Mitsubishi M70 M80 › G07.1
G07.1 Cylindrical interpolation
Mitsubishi M70 M80 G-code · Lathe
Unwraps the C axis on a radius so grooves on a diameter can be programmed as straight lines.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
G07.1 C
Addresses
| Address | What it does |
|---|---|
C | Cylinder radius, 0 cancels |
How it works
Modal until G07.1 C0.
Example program
G98 (FEED PER MINUTE)
G07.1 C1. (ON AT 1.0 RADIUS)
G01 Z-1. C2. F10. (SLOT)
G07.1 C0. (OFF)
G07.1 C1. (ON AT 1.0 RADIUS)
G01 Z-1. C2. F10. (SLOT)
G07.1 C0. (OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- Cancel with G07.1 C0.
- Cutter comp is allowed only after the mode is on.
Related codes
G07.1 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Cylindrical interpolation |
| Mazak (EIA) | Cylindrical interpolation |
Every G-code for Mitsubishi M70 M80 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G07.1 in the app All Mitsubishi M70 M80 G-codes