CNC Machinist Calculator UltraHome › G-codes › Mitsubishi M70 M80 › G88
G88 Boring cycle, manual retract
Mitsubishi M70 M80 G-code · Mill
Feeds to Z, dwells and stops the spindle so the operator can retract by hand.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
G88 X Y Z R P F
Addresses
| Address | What it does |
|---|---|
X Y | Hole position |
Z | Hole bottom |
R | R plane |
P | Dwell |
F | Feed rate |
How it works
Modal, canned cycle group 09. Cancel with G80.
Example program
G90 G54 G00 X2. Y2. S500 M03 (START)
G43 H12 Z1. (LENGTH COMP)
G98 G88 Z-1. R.1 P1000 F3. (BORE THEN STOP)
G80 G00 Z1. (CANCEL)
G43 H12 Z1. (LENGTH COMP)
G98 G88 Z-1. R.1 P1000 F3. (BORE THEN STOP)
G80 G00 Z1. (CANCEL)
Example is in inch. Check offsets and clearances first.
Watch out for
- Rarely used. The operator must know what to do at the stop.
Related codes
G88 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Boring cycle, manual retract |
| Haas NGC | Boring cycle, dwell and manual retract |
| Mazak (EIA) | Side tapping cycle, live tool |
| Okuma OSP | LAP continuous thread cutting cycle |
| Brother Speedio | Boring cycle with manual retract |
| Fagor 8055 8065 | Circular pocket canned cycle |
| LinuxCNC Tormach | Boring cycle, manual out, not implemented |
| Mach3 Mach4 | Bore, manual retract |
| Hurco WinMax (NC) | Rigid tap (BNC) or bore manual out (ISNC) |
| Fadal | Bore in, dwell, bore out |
| Swiss (Citizen Star) | Side tapping cycle |
Every G-code for Mitsubishi M70 M80 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G88 in the app All Mitsubishi M70 M80 G-codes