CNC Machinist Calculator UltraHome › G-codes › Siemens 840D 828D › CYCLE952
CYCLE952 Contour turning cycle
Siemens 840D 828D G-code · Lathe
Roughs, finishes, plunges or grooves along a contour drawn in the contour editor. Written by the ShopTurn and Operate contour turning screens. It can also track rest material.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
CYCLE952(...)
Addresses
| Address | What it does |
|---|---|
Contour | Contour name or labels created in the contour editor |
Machining | Roughing, finishing, plunge or grooving, longitudinal or face, outside or inside |
Infeed | Maximum depth of cut |
Allowance | Finish allowance in X and Z |
How it works
Non modal.
Example program
T1 D1 ; ROUGH TURNING TOOL
G96 S200 LIMS=2500 M3
G0 X52 Z2
; CONTOUR AND CYCLE952 CALL ARE CREATED IN THE CONTOUR TURNING SCREEN
…
G96 S200 LIMS=2500 M3
G0 X52 Z2
; CONTOUR AND CYCLE952 CALL ARE CREATED IN THE CONTOUR TURNING SCREEN
…
The full 5-line example is in the app. Example is in inch. Check offsets and clearances first.
Watch out for
- Change the contour and cycle from the screens, not by hand. The parameter list is long and version dependent.
- Rest material machining needs a stored blank or the result of a previous CYCLE952.
Related codes
Every G-code for Siemens 840D 828D in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open CYCLE952 in the app All Siemens 840D 828D G-codes