CNC Machinist Calculator UltraHome › M-codes › Centroid CNC12 Acorn › M95
M95 Turn PLC request bit off
Centroid CNC12 Acorn M-code · Mill and lathe
Turns off M request bit 1 to 128 for the PLC. Motion stops before the bit changes.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M95 /bit [/bit]
Addresses
| Address | What it does |
|---|---|
bit | Request bit number 1 to 128, after a slash |
How it works
Modal.
Example program
M94 /12 ; REQUEST ON
G4 P1. ; WAIT
M95 /12 ; REQUEST OFF
G4 P1. ; WAIT
M95 /12 ; REQUEST OFF
Example is in inch. Check offsets and clearances first.
Watch out for
- Several bits can be listed on one line, each after its own slash.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M95 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Haas NGC | Sleep mode |
| DMG Mori MAPPS (Fanuc) | Chip removal coolant OFF |
| Fadal | Feed forward cancel |
Every M-code for Centroid CNC12 Acorn in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M95 in the app All Centroid CNC12 Acorn M-codes