CNC Machinist Calculator UltraHome › M-codes › Haas NGC › M49
M49 Set status of pallet
Haas NGC M-code · Mill
Sets the status of a pallet in the pallet schedule table from the program.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M49 P
Addresses
| Address | What it does |
|---|---|
P | Pallet number |
How it works
Not modal. Acts once on the line where it is commanded.
Example program
G91 G28 Z0. (Z HOME)
M49 P1 (SET STATUS OF PALLET 1)
M50 (PALLET CHANGE)
M49 P1 (SET STATUS OF PALLET 1)
M50 (PALLET CHANGE)
Example is in inch. Check offsets and clearances first.
Watch out for
- Check the manual for the status values used on your machine.
Related codes
M49 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Doosan (Fanuc) | Milling spindle orientation |
| DMG Mori MAPPS (Fanuc) | Override cancel ON |
| Mazak (EIA) | Parts catcher retract |
| Okuma OSP | Spindle speed override ignore |
| LinuxCNC Tormach | Disable feed and speed overrides |
| Mach3 Mach4 | Overrides off |
| Fadal | Feed and RPM override inactive |
Every M-code for Haas NGC in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M49 in the app All Haas NGC M-codes