CNC Machinist Calculator UltraHome › M-codes › Hurco WinMax (NC) › M07
M07 Mist coolant on
Hurco WinMax (NC) M-code · Mill
Turns on the secondary coolant, usually mist.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M07
Addresses
| Address | What it does |
|---|---|
none | No words |
How it works
Modal. Cancel with M09.
Example program
T1 M06 (.500 END MILL)
G43 H01 Z1. M07 (MIST ON)
M09 (COOLANT OFF)
G43 H01 Z1. M07 (MIST ON)
M09 (COOLANT OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- Only works if a secondary coolant system is fitted.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M07 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Mist or second coolant on |
| Haas NGC | Shower coolant on |
| Doosan (Fanuc) | Bed shoer coolant on |
| Mazak (EIA) | Chuck clamp (holding workpiece) |
| LinuxCNC Tormach | Mist coolant on |
| Mach3 Mach4 | Mist coolant on |
| Centroid CNC12 Acorn | Mist coolant on |
| Fadal | Mist coolant on |
| Swiss (Citizen Star) | Main chuck open (Citizen) |
Every M-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M07 in the app All Hurco WinMax M-codes