CNC Machinist Calculator UltraHome › M-codes › Hurco WinMax (NC) › M10
M10 Both coolant systems on
Hurco WinMax (NC) M-code · Mill
Turns on primary and secondary coolant together.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M10
Addresses
| Address | What it does |
|---|---|
none | No words |
How it works
Modal. Cancel with M09.
Example program
T1 M06 (.500 END MILL)
G43 H01 Z1. M10 (FLOOD AND MIST ON)
M09 (COOLANT OFF)
G43 H01 Z1. M10 (FLOOD AND MIST ON)
M09 (COOLANT OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- On many other controls M10 is a clamp code. On a Hurco mill it is coolant.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M10 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Chuck clamp |
| Haas NGC | 4th axis brake on |
| Doosan (Fanuc) | Parts unloader down to chuck |
| DMG Mori MAPPS (Fanuc) | C-axis clamp |
| Centroid CNC12 Acorn | Clamp or chuck on |
| Fadal | Cancel reciprocation |
| Swiss (Citizen Star) | Back knock-out on (Citizen) |
Every M-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M10 in the app All Hurco WinMax M-codes