CNC Machinist Calculator UltraHome › M-codes › Hurco WinMax (NC) › M200
M200 Tilt axis preference
Hurco WinMax (NC) M-code · Mill
Picks which side the tilt axis uses in 5 axis work. P1 keeps B from 0 to plus 90, P2 from minus 90 to 0, P0 no preference.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
Addresses
| Address | What it does |
|---|---|
P | P0 none, P1 positive, P2 negative |
How it works
Modal.
Example program
M128 (TCPM ON)
G01 X1. Y0. Z0. I0. J-.5 K.866 F40. (5 AXIS MOVE)
M129 (TCPM OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- Applies only with M128 or a transform plane plus tool vector input, or with G07.2.
- The machine may swing the part 180 degrees to reach the preferred side. Watch clearance.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M200 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Doosan (Fanuc) | Tool load monitor off |
| DMG Mori MAPPS (Fanuc) | Chip conveyor start (forward direction) |
| Mazak (EIA) | Milling point machining start |
| Centroid CNC12 Acorn | Stop and show a message |
| Swiss (Citizen Star) | Waiting M code (Star) |
Every M-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M200 in the app All Hurco WinMax M-codes