CNC Machinist Calculator UltraHome › M-codes › Hurco WinMax (NC) › M32
M32 Clamp A axis
Hurco WinMax (NC) M-code · Mill
Clamps the A rotary axis.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M32
Addresses
| Address | What it does |
|---|---|
none | No words |
How it works
Modal.
Example program
G00 A90. (INDEX A)
M32 (CLAMP A)
G01 X2. F20. (CUT)
M32 (CLAMP A)
G01 X2. F20. (CUT)
Example is in inch. Check offsets and clearances first.
Watch out for
- Clamp after indexing for rigid cuts.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M32 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| DMG Mori MAPPS (Fanuc) | Axis interlock bypass OFF |
| Mazak (EIA) | Tail spindle & tailstock body retract (for 300 or 400-III or IIIT) |
| Okuma OSP | Straight in-feed along thread face mode (on left face) |
| Fadal | Store or load pallet A |
Every M-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M32 in the app All Hurco WinMax M-codes