CNC Machinist Calculator UltraHome › M-codes › Mitsubishi M70 M80 › M96
M96 Macro interrupt enable
Mitsubishi M70 M80 M-code · Mill and lathe
Turns on user macro interrupt. When the interrupt signal comes on, the control runs program P.
Format
M96 P [H]
Addresses
| Address | What it does |
|---|---|
P | Interrupt program number |
H | Sequence number to start at |
How it works
Modal until M97.
Example program
M96 P9500 (INTERRUPT ON)
G01 X5. F20. (CUT WHILE WATCHING)
M97 (INTERRUPT OFF)
G01 X5. F20. (CUT WHILE WATCHING)
M97 (INTERRUPT OFF)
Example is in inch. Check offsets and clearances first.
Watch out for
- The interrupt signal is wired by the builder, often to a probe or tool breakage check.
- Parameters can move this function to other M codes.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M96 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Interrupt type macro enable |
| Haas NGC | Jump if no input |
| DMG Mori MAPPS (Fanuc) | Macro interrupt mode |
| Mazak (EIA) | User macro interruption, valid |
| Fadal | Roll cutter comp at corners |
Every M-code for Mitsubishi M70 M80 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M96 in the app All Mitsubishi M70 M80 M-codes