CNC Machinist Calculator UltraHome › M-codes › Swiss (Citizen Star) › M02
M02 End of one cycle (Citizen)
Swiss (Citizen Star) M-code · Lathe
In the Citizen code table M02 is a one cycle stop. It ends the cycle at the end of the program.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M02
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
One shot.
Example program
G600 (MODE CANCEL)
G00 X.8 (CLEAR)
M02 (ONE CYCLE END)
G00 X.8 (CLEAR)
M02 (ONE CYCLE END)
Example is in inch. Check offsets and clearances first.
Watch out for
- Builder macros often control this. Check if your model uses M02 or a loop.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M02 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | End of program |
| Haas NGC | Program end |
| Doosan (Fanuc) | Program end |
| DMG Mori MAPPS (Fanuc) | Program end |
| Mazak (EIA) | Program end |
| Okuma OSP | End of program (Lathes & Mills) |
| Mitsubishi M70 M80 | End of program |
| Brother Speedio | Program end |
| Siemens 840D 828D | End of main program |
| Heidenhain TNC (ISO) | End of program |
| Fagor 8055 8065 | End of program |
| LinuxCNC Tormach | Program end |
| Mach3 Mach4 | Program end |
| Centroid CNC12 Acorn | Restart program |
| Hurco WinMax (NC) | End of program |
| Fadal | End of program |
Every M-code for Swiss (Citizen Star) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M02 in the app All Swiss M-codes