CNC Machinist Calculator UltraHome › G-codes › Brother Speedio › G82
G82 Drilling cycle with dwell
Brother Speedio G-code · Mill
Like G81 with a dwell at the bottom. Use for spot facing and counterbores.
Format
G82 X Y Z R P F
Addresses
| Address | What it does |
|---|---|
X Y | Hole position |
Z | Hole bottom |
R | R plane |
P | Dwell in milliseconds |
F | Feed rate |
How it works
Modal, canned cycle. Cancel with G80.
Example program
G100 T03 G90 G54 G00 X1. Y1. G43 H03 Z1. S2500 M03 (COUNTERBORE)
G99 G82 Z-.25 R.1 P300 F8. (DWELL AT BOTTOM)
G80 G00 Z1. (CANCEL)
G99 G82 Z-.25 R.1 P300 F8. (DWELL AT BOTTOM)
G80 G00 Z1. (CANCEL)
Example is in inch. Check offsets and clearances first.
Watch out for
- P has no decimal point. P300 is .3 seconds.
Related codes
G82 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Drilling cycle with dwell |
| Haas NGC | Spot drill and counterbore cycle |
| Mazak (EIA) | Drilling cycle with dwell |
| Okuma OSP | Counterbore cycle with dwell |
| Mitsubishi M70 M80 | Drilling cycle with dwell |
| Fagor 8055 8065 | Drilling with dwell |
| LinuxCNC Tormach | Drill cycle with dwell |
| Mach3 Mach4 | Drill with dwell |
| Centroid CNC12 Acorn | Drilling cycle with dwell |
| Hurco WinMax (NC) | Drill with dwell or counterbore |
| Fadal | Spot drill or counterbore with dwell |
Every G-code for Brother Speedio in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G82 in the app All Brother Speedio G-codes