CNC Machinist Calculator UltraHome › G-codes › Mitsubishi M70 M80 › G82
G82 Drilling cycle with dwell
Mitsubishi M70 M80 G-code · Mill
Like G81 with a dwell at the bottom. Used for counterbores and spot faces.
Format
G82 X Y Z R P F
Addresses
| Address | What it does |
|---|---|
X Y | Hole position |
Z | Hole bottom |
R | R plane |
P | Dwell at bottom |
F | Feed rate |
How it works
Modal, canned cycle group 09. Cancel with G80.
Example program
G90 G54 G00 X1. Y1. S800 M03 (CBORE START)
G43 H05 Z1. M08 (LENGTH COMP)
G98 G82 Z-.33 R.1 P500 F5. (COUNTERBORE WITH DWELL)
G80 G00 Z1. (CANCEL)
G43 H05 Z1. M08 (LENGTH COMP)
G98 G82 Z-.33 R.1 P500 F5. (COUNTERBORE WITH DWELL)
G80 G00 Z1. (CANCEL)
Example is in inch. Check offsets and clearances first.
Watch out for
- Check how P without a decimal point is read on your machine. P500 is often half a second.
Related codes
G82 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Drilling cycle with dwell |
| Haas NGC | Spot drill and counterbore cycle |
| Mazak (EIA) | Drilling cycle with dwell |
| Okuma OSP | Counterbore cycle with dwell |
| Brother Speedio | Drilling cycle with dwell |
| Fagor 8055 8065 | Drilling with dwell |
| LinuxCNC Tormach | Drill cycle with dwell |
| Mach3 Mach4 | Drill with dwell |
| Centroid CNC12 Acorn | Drilling cycle with dwell |
| Hurco WinMax (NC) | Drill with dwell or counterbore |
| Fadal | Spot drill or counterbore with dwell |
Every G-code for Mitsubishi M70 M80 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G82 in the app All Mitsubishi M70 M80 G-codes