CNC Machinist Calculator UltraFadal G-code list
79 G-codes. Pick a code for the format, the addresses, an example program and what to watch out for.
| Code | Meaning | Machine |
|---|---|---|
| G0 | Rapid travel | Mill |
| G1 | Linear interpolation at feed | Mill |
| G2 | Circular interpolation clockwise | Mill |
| G3 | Circular interpolation counterclockwise | Mill |
| G4 | Dwell | Mill |
| G5 | Non modal rapid travel | Mill |
| G8 | Accelerate, no feed ramps | Mill |
| G9 | Decelerate with feed ramps, exact stop | Mill |
| G10 | Programmable data input | Mill |
| G15 | YZ circular interpolation with A axis | Mill |
| G17 | XY plane select | Mill |
| G17.1 | A and B word swap on | Mill |
| G17.2 | A and B word swap off | Mill |
| G18 | ZX plane select | Mill |
| G19 | YZ plane select | Mill |
| G20 | Check for inch setting | Mill |
| G21 | Check for metric setting | Mill |
| G28 | Return to zero | Mill |
| G28.1 | Return from jog away | Mill |
| G29 | Return from zero | Mill |
| G31 | Probe touch function | Mill |
| G31.1 | Probe no touch function | Mill |
| G40 | Cutter radius compensation cancel | Mill |
| G41 | Cutter radius compensation left, climb | Mill |
| G42 | Cutter radius compensation right, conventional | Mill |
| G43 | Tool length compensation positive | Mill |
| G44 | Tool length compensation negative | Mill |
| G45 | Tool offset single expansion | Mill |
| G46 | Tool offset single reduction | Mill |
| G47 | Tool offset double expansion | Mill |
| G48 | Tool offset double reduction | Mill |
| G49 | Tool length offset cancel | Mill |
| G50 | Ramp slope control cancel | Mill |
| G50.1 | Mirror image cancel | Mill |
| G51 | Ramp slope control | Mill |
| G51.1 | Mirror image | Mill |
| G51.2 | Tool load compensation | Mill |
| G51.3 | Axis scaling | Mill |
| G52 | Coordinate system shift | Mill |
| G53 | Use machine coordinate system | Mill |
| G54 | Fixture offset 1, same as E1 | Mill |
| G55 | Fixture offset 2, same as E2 | Mill |
| G56 | Fixture offset 3, same as E3 | Mill |
| G57 | Fixture offset 4, same as E4 | Mill |
| G58 | Fixture offset 5, same as E5 | Mill |
| G59 | Fixture offset 6, same as E6 | Mill |
| G66 | Modal subroutine call | Mill |
| G67 | Modal subroutine call cancel | Mill |
| G68 | Coordinate rotation | Mill |
| G69 | Coordinate rotation cancel | Mill |
| G70 | Check for inch setting, older code | Mill |
| G71 | Check for metric setting, older code | Mill |
| G73 | Peck drill, chip break | Mill |
| G74 | Left hand tap | Mill |
| G74.1 | Left hand rigid tap | Mill |
| G74.2 | Prepare for left hand rigid tap | Mill |
| G75 | Tapping head cycle | Mill |
| G76 | Fine boring with oriented shift | Mill |
| G80 | Fixed cycle cancel | Mill |
| G81 | Drill, spot drill | Mill |
| G82 | Spot drill or counterbore with dwell | Mill |
| G83 | Deep hole peck drill | Mill |
| G84 | Right hand tap, floating holder | Mill |
| G84.1 | Right hand rigid tap | Mill |
| G84.2 | Prepare for right hand rigid tap | Mill |
| G85 | Bore in, bore out | Mill |
| G86 | Bore in, spindle off, rapid out | Mill |
| G87 | Bore in and out, Fadal G87 | Mill |
| G88 | Bore in, dwell, bore out | Mill |
| G89 | Bore in, dwell, bore out | Mill |
| G90 | Absolute positioning | Mill |
| G91 | Incremental positioning | Mill |
| G91.1 | High speed execution | Mill |
| G91.2 | High speed execution cancel | Mill |
| G92 | Absolute preset | Mill |
| G93 | Inverse time feed | Mill |
| G94 | Feed per minute | Mill |
| G98 | Fixed cycle return to start plane | Mill |
| G99 | Fixed cycle return to R0 plane | Mill |
Take the list to the machine. The app searches every code by number or shop word and decodes a whole program line by line.
Open the G-code list Fadal M-codes