Fadal M-code list

46 M-codes. Pick a code for the format, the addresses, an example program and what to watch out for.

Code	Meaning	Machine
M0	Program stop	Mill
M1	Optional stop	Mill
M2	End of program	Mill
M3	Spindle on clockwise	Mill
M4	Spindle on counterclockwise	Mill
M5	Spindle off	Mill
M6	Tool change	Mill
M7	Mist coolant on	Mill
M8	Coolant on	Mill
M9	Coolant off	Mill
M10	Cancel reciprocation	Mill
M11	Reciprocation, X axis	Mill
M17	End of subroutine, Format 1	Mill
M18	Cycle Cushman indexer	Mill
M19	Spindle stop and orient	Mill
M20	Cycle general purpose indexer	Mill
M30	End of all subroutines, or end of program	Mill
M31	Exchange pallets	Mill
M32	Store or load pallet A	Mill
M33	Store or load pallet B	Mill
M41	Low range RPM	Mill
M42	High range RPM	Mill
M45	Execute fixed cycle	Mill
M46	Positive approach on	Mill
M47	Positive approach cancel	Mill
M48	Feed and RPM override active	Mill
M49	Feed and RPM override inactive	Mill
M60	A axis brake on	Mill
M61	A axis brake off	Mill
M62	B axis brake on	Mill
M63	B axis brake off	Mill
M64	MP spindle probe active	Mill
M65	TS-20 tool setter probe active	Mill
M66	MP-12 probe active	Mill
M67	Laser probe active	Mill
M80	Automatic doors open	Mill
M81	Automatic doors close	Mill
M90	Default servo gain	Mill
M91	Normal servo gain	Mill
M92	Intermediate servo gain	Mill
M94	Feed forward on	Mill
M95	Feed forward cancel	Mill
M96	Roll cutter comp at corners	Mill
M97	Intersectional cutter comp	Mill
M98	Execute subprogram	Mill
M99	End of subprogram, or line jump	Mill

Take the list to the machine. The app searches every code by number or shop word and decodes a whole program line by line.