CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G70
G70 Inch programming
Fagor 8055 8065 G-code · Mill and lathe
Coordinates and feeds are read in inches. Fagor uses G70 for inch, not G20.
Format
G70
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal. Default G70 or G71 is set by a machine parameter.
Example program
G70 G90 G54 (INCH, ABSOLUTE, PART ZERO 1)
G00 X1.0 Y1.0 (ONE INCH MOVE)
G01 Z-0.1 F10.0 (TEN INCHES PER MINUTE)
G00 X1.0 Y1.0 (ONE INCH MOVE)
G01 Z-0.1 F10.0 (TEN INCHES PER MINUTE)
Example is in inch. Check offsets and clearances first.
Watch out for
- Fanuc programs with G20 for inch do not work. On the 8055 G20 is a work zone code.
- Put G70 or G71 at the top of every program.
Related codes
G70 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Finishing cycle |
| Haas NGC | Bolt hole circle |
| Mazak (EIA) | Finishing cycle |
| Mitsubishi M70 M80 | Finishing cycle |
| Siemens 840D 828D | Inch input for geometry |
| Heidenhain TNC (ISO) | Inch units |
| LinuxCNC Tormach | Lathe finishing cycle |
| Mach3 Mach4 | Inch units, Mach3 |
| Centroid CNC12 Acorn | Profile finishing cycle |
| Hurco WinMax (NC) | Inch input (Basic NC) |
| Fadal | Check for inch setting, older code |
| Swiss (Citizen Star) | Finish turning cycle |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G70 in the app All Fagor 8055 8065 G-codes