CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065
Fagor 8055 8065 G-code list
65 G-codes. Pick a code for the format, the addresses, an example program and what to watch out for.
| Code | Meaning | Machine |
|---|---|---|
| G00 | Rapid traverse | Mill and lathe |
| G01 | Linear interpolation | Mill and lathe |
| G02 | Clockwise circular interpolation | Mill and lathe |
| G03 | Counterclockwise circular interpolation | Mill and lathe |
| G04 | Dwell or stop block preparation | Mill and lathe |
| G05 | Round corner | Mill and lathe |
| G06 | Arc center in absolute coordinates | Mill and lathe |
| G07 | Square corner | Mill and lathe |
| G08 | Arc tangent to previous path | Mill and lathe |
| G09 | Arc defined by three points | Mill and lathe |
| G10 | Mirror image cancel | Mill and lathe |
| G11 | Mirror image on X | Mill and lathe |
| G14 | Mirror image on programmed axes | Mill and lathe |
| G15 | Longitudinal axis selection | Mill |
| G16 | Main plane by two axes | Mill |
| G17 | XY plane select | Mill and lathe |
| G18 | ZX plane select | Mill and lathe |
| G20 | Lower work zone limits (8055) | Mill and lathe |
| G22 | Enable or disable work zones | Mill and lathe |
| G33 | Electronic threading | Mill and lathe |
| G36 | Automatic radius blend | Mill and lathe |
| G37 | Tangential entry | Mill and lathe |
| G38 | Tangential exit | Mill and lathe |
| G39 | Automatic chamfer | Mill and lathe |
| G40 | Cancel tool radius compensation | Mill and lathe |
| G41 | Tool radius compensation left | Mill and lathe |
| G42 | Tool radius compensation right | Mill and lathe |
| G43 | Tool length compensation on | Mill |
| G44 | Tool length compensation cancel | Mill |
| G50 | Controlled corner rounding | Mill and lathe |
| G53 | Machine coordinates | Mill and lathe |
| G54 | Absolute zero offset 1 | Mill and lathe |
| G60 | Multiple machining in a straight line | Mill |
| G61 | Multiple machining in a rectangular pattern | Mill |
| G63 | Multiple machining in a circular pattern | Mill |
| G66 | Irregular pocket canned cycle / Pattern repeat cycle (lathe) | Mill, Lathe |
| G68 | Stock removal along X (lathe) | Lathe |
| G69 | Complex deep hole drilling / Stock removal along Z (lathe) | Mill, Lathe |
| G70 | Inch programming | Mill and lathe |
| G71 | Millimeter programming | Mill and lathe |
| G72 | Scaling factor | Mill and lathe |
| G73 | Pattern rotation | Mill |
| G74 | Home search | Mill and lathe |
| G75 | Probing move until touch | Mill and lathe |
| G76 | Probing move while touching | Mill and lathe |
| G80 | Canned cycle cancel | Mill |
| G81 | Drilling canned cycle / Turning cycle, straight sections (lathe) | Mill, Lathe |
| G82 | Drilling with dwell / Facing cycle, straight sections (lathe) | Mill, Lathe |
| G83 | Deep hole drilling, constant peck / Deep hole drilling cycle (lathe) | Mill, Lathe |
| G84 | Tapping canned cycle / Turning cycle, arc sections (lathe) | Mill, Lathe |
| G85 | Reaming canned cycle / Facing cycle, arc sections (lathe) | Mill, Lathe |
| G86 | Boring, rapid withdrawal / Longitudinal threading cycle (lathe) | Mill, Lathe |
| G87 | Rectangular pocket canned cycle / Face threading cycle (lathe) | Mill, Lathe |
| G88 | Circular pocket canned cycle / Grooving cycle along X (lathe) | Mill, Lathe |
| G89 | Boring, feed withdrawal / Grooving cycle along Z (lathe) | Mill, Lathe |
| G90 | Absolute programming | Mill and lathe |
| G91 | Incremental programming | Mill and lathe |
| G92 | Coordinate preset or spindle speed limit | Mill and lathe |
| G93 | Polar origin preset | Mill and lathe |
| G94 | Feed per minute | Mill and lathe |
| G95 | Feed per revolution | Mill and lathe |
| G96 | Constant feed at cutting point (mill) / Constant surface speed (lathe) | Mill, Lathe |
| G97 | Constant tool center feed (mill) / Spindle speed in rpm (lathe) | Mill, Lathe |
| G98 | Return to initial plane | Mill |
| G99 | Return to reference plane | Mill |
Take the list to the machine. The app searches every code by number or shop word and decodes a whole program line by line.
Open the G-code list Fagor 8055 8065 M-codes