CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G98
G98 Return to initial plane
Fagor 8055 8065 G-code · Mill
After each hole the canned cycle returns to the plane the tool was at when the cycle started.
Format
G98
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal with the canned cycle. Replaced by G99.
Example program
G00 G90 Z1.0 (INITIAL PLANE)
G81 G98 X1.0 Y1.0 Z0.1 I-0.5 F8.0 (RETURN TO Z1.0)
X3.0 (OVER THE CLAMP)
G80 (CANCEL CYCLE)
G81 G98 X1.0 Y1.0 Z0.1 I-0.5 F8.0 (RETURN TO Z1.0)
X3.0 (OVER THE CLAMP)
G80 (CANCEL CYCLE)
Example is in inch. Check offsets and clearances first.
Watch out for
- Use G98 to clear clamps between holes.
Related codes
G98 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Canned cycle return to initial level |
| Haas NGC | Canned cycle initial point return |
| Mazak (EIA) | Canned cycle return to initial point |
| Mitsubishi M70 M80 | Canned cycle return to start level |
| Brother Speedio | Canned cycle return to initial point |
| Heidenhain TNC (ISO) | Set label |
| LinuxCNC Tormach | Cycle retract to start height |
| Mach3 Mach4 | Cycle return to initial point |
| Centroid CNC12 Acorn | Canned cycle return to start height |
| Hurco WinMax (NC) | Cycle return to initial point |
| Fadal | Fixed cycle return to start plane |
| Swiss (Citizen Star) | Feed per minute |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G98 in the app All Fagor 8055 8065 G-codes