CNC Machinist Calculator UltraHome › G-codes › Haas NGC › G153
G153 5 axis high speed peck drilling cycle
Haas NGC G-code · Mill
High speed peck cycle along the tool axis on a 5 axis machine. Listed on older Haas controls.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
G153 X Y Z A B E Q F
Addresses
| Address | What it does |
|---|---|
X Y Z | Start position |
A B | Rotary angles |
E | Hole depth along the tool axis |
Q | Peck depth |
F | Feed rate |
How it works
Modal, canned cycle group 09. Cancel with G80.
Example program
G90 G54 G00 X1. Y1. Z1. A0. B30. (POSITION AT THE ANGLE)
G153 X1. Y1. Z1. A0. B30. E.75 Q.1 F10. (5 AXIS PECK)
G80 (CANCEL)
G153 X1. Y1. Z1. A0. B30. E.75 Q.1 F10. (5 AXIS PECK)
G80 (CANCEL)
Example is in inch. Check offsets and clearances first.
Watch out for
- Not listed for current NGC mills. Check your manual.
Related codes
G153 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Siemens 840D 828D | Suppress all frames including basic frame |
Every G-code for Haas NGC in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G153 in the app All Haas NGC G-codes