CNC Machinist Calculator UltraHome › G-codes › Hurco WinMax (NC) › G00
G00 Rapid positioning
Hurco WinMax (NC) G-code · Mill
Moves the axes at rapid rate to the end point. G00 is the default motion mode. Use it only for moves in air.
Format
G00 [X] [Y] [Z] [A] [B] [C] [W]
Addresses
| Address | What it does |
|---|---|
X Y Z | End point |
A B C | Rotary axis positions |
W | Secondary linear axis in the Z direction, if fitted |
How it works
Modal, group 01. Replaced by G01, G02, G03 or a canned cycle.
Example program
T1 M06 (.500 END MILL)
G90 G54 G00 X-.6 Y0. S3000 M03 (RAPID TO START, SPINDLE ON)
G43 H01 Z1. M08 (LENGTH OFFSET, COOLANT ON)
G00 Z.1 (RAPID CLOSE TO PART)
…
G90 G54 G00 X-.6 Y0. S3000 M03 (RAPID TO START, SPINDLE ON)
G43 H01 Z1. M08 (LENGTH OFFSET, COOLANT ON)
G00 Z.1 (RAPID CLOSE TO PART)
…
The full 6-line example is in the app. Example is in inch. Check offsets and clearances first.
Watch out for
- The manual says a G00 that raises Z moves Z first, and a G00 that lowers Z moves XY first and Z last. Plan clamp clearance with that in mind.
- Linear or non linear rapid path is set on the NC Parameters screen. Non linear moves XY at 45 degrees first, then straight.
- Rapid rate comes from the machine parameters. M194 can lower the maximum rapid for one program.
Related codes
G00 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Rapid positioning |
| Haas NGC | Rapid motion positioning |
| Mazak (EIA) | Rapid positioning |
| Okuma OSP | Rapid positioning |
| Mitsubishi M70 M80 | Rapid positioning |
| Brother Speedio | Rapid positioning |
| Siemens 840D 828D | Rapid traverse positioning |
| Heidenhain TNC (ISO) | Rapid straight line, Cartesian |
| Fagor 8055 8065 | Rapid traverse |
| LinuxCNC Tormach | Rapid move |
| Mach3 Mach4 | Rapid move |
| Centroid CNC12 Acorn | Rapid positioning |
| Fadal | Rapid travel |
| Swiss (Citizen Star) | Rapid positioning |
Every G-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G00 in the app All Hurco WinMax G-codes