CNC Machinist Calculator UltraHome › G-codes › Hurco WinMax (NC) › G01
G01 Linear feed move
Hurco WinMax (NC) G-code · Mill
Moves the axes in a straight line at the programmed feed rate. Up to five axes can move together. F applies until changed.
Format
G01 [X] [Y] [Z] [A] [B] [C] F
Addresses
| Address | What it does |
|---|---|
X Y Z | End point of the cut |
A B C | Rotary axis positions |
F | Feed rate. Degrees per minute for rotary only moves |
How it works
Modal, group 01. Replaced by G00, G02, G03 or a canned cycle.
Example program
T1 M06 (.500 END MILL)
G90 G54 G00 X-.6 Y0. S3000 M03 (START OFF THE PART)
G43 H01 Z1. M08 (LENGTH OFFSET)
G01 Z-.25 F10. (FEED TO DEPTH)
…
G90 G54 G00 X-.6 Y0. S3000 M03 (START OFF THE PART)
G43 H01 Z1. M08 (LENGTH OFFSET)
G01 Z-.25 F10. (FEED TO DEPTH)
…
The full 6-line example is in the app. Example is in inch. Check offsets and clearances first.
Watch out for
- In Basic NC inch mode an F without a decimal point is divided by 10. F30 means 3 inches per minute. Always write F30. with the point.
- In ISNC the same divide by 10 happens only if Assume Feedrate 1 Increment is Yes on the NC Parameters screen.
- After a tool change an absolute Z move must come before other moves.
Related codes
G01 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Linear interpolation at feed rate |
| Haas NGC | Linear interpolation feed motion |
| Mazak (EIA) | Linear interpolation, feed move |
| Okuma OSP | Linear interpolation |
| Mitsubishi M70 M80 | Linear feed move |
| Brother Speedio | Linear interpolation |
| Siemens 840D 828D | Linear interpolation at feed rate |
| Heidenhain TNC (ISO) | Straight line at feed rate, Cartesian |
| Fagor 8055 8065 | Linear interpolation |
| LinuxCNC Tormach | Linear feed move |
| Mach3 Mach4 | Linear feed move |
| Centroid CNC12 Acorn | Linear feed move |
| Fadal | Linear interpolation at feed |
| Swiss (Citizen Star) | Linear feed move |
Every G-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G01 in the app All Hurco WinMax G-codes