CNC Machinist Calculator UltraHome › G-codes › Mitsubishi M70 M80 › G94
G94 Feed per minute / Face cutting fixed cycle
Mitsubishi M70 M80 G-code · Mill, Lathe
On mills: Feed per minute
F is in inches per minute. Default mode on machining centers.
Format
G94
How it works
Modal, group 05.
Example program
G94 (FEED PER MINUTE)
G01 X2. F20. (20 IPM)
Y1. (STILL 20 IPM)
G01 X2. F20. (20 IPM)
Y1. (STILL 20 IPM)
Example is in inch. Check offsets and clearances first.
Watch out for
- Tapping feed in G94 is RPM times pitch.
On lathes: Face cutting fixed cycle
In G code list 2, G94 is a one pass facing box cycle, not feed per minute. Other lists use G79.
Format
G94 X Z [R] F
Addresses
| Address | What it does |
|---|---|
X Z | End point of the cut |
R | Taper amount in Z |
F | Feed |
How it works
Modal, group 01.
Example program
G00 X3.1 Z.1 (START POINT)
G94 X.5 Z-.05 F.01 (FACE PASS 1)
Z-.1 (FACE PASS 2)
G00 X3.5 Z1. (CLEAR)
G94 X.5 Z-.05 F.01 (FACE PASS 1)
Z-.1 (FACE PASS 2)
G00 X3.5 Z1. (CLEAR)
Example is in inch. Check offsets and clearances first.
Watch out for
- In list 2, feed per minute is G98, not G94.
Related codes
G94 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Feed per minute |
| Haas NGC | Feed per minute mode |
| Mazak (EIA) | Feed per minute |
| Okuma OSP | Feed per minute |
| Brother Speedio | Feed per minute |
| Siemens 840D 828D | Feed per minute |
| Fagor 8055 8065 | Feed per minute |
| LinuxCNC Tormach | Feed per minute |
| Mach3 Mach4 | Feed per minute |
| Centroid CNC12 Acorn | Feed per minute |
| Hurco WinMax (NC) | Feed per minute |
| Fadal | Feed per minute |
| Swiss (Citizen Star) | Face turning cycle |
Every G-code for Mitsubishi M70 M80 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G94 in the app All Mitsubishi M70 M80 G-codes