CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G94
G94 Feed per minute
Fagor 8055 8065 G-code · Mill and lathe
F is in inches per minute in G70 or millimeters per minute in G71.
Format
G94
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal. Default G94 or G95 set by a machine parameter.
Example program
G94 G70 (FEED IN INCHES PER MINUTE)
G01 X2.0 F20.0 (20 INCHES PER MINUTE)
G00 Z1.0 (RETRACT)
G01 X2.0 F20.0 (20 INCHES PER MINUTE)
G00 Z1.0 (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- Mills normally run G94.
Related codes
G94 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Feed per minute |
| Haas NGC | Feed per minute mode |
| Mazak (EIA) | Feed per minute |
| Okuma OSP | Feed per minute |
| Mitsubishi M70 M80 | Feed per minute |
| Brother Speedio | Feed per minute |
| Siemens 840D 828D | Feed per minute |
| LinuxCNC Tormach | Feed per minute |
| Mach3 Mach4 | Feed per minute |
| Centroid CNC12 Acorn | Feed per minute |
| Hurco WinMax (NC) | Feed per minute |
| Fadal | Feed per minute |
| Swiss (Citizen Star) | Face turning cycle |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G94 in the app All Fagor 8055 8065 G-codes