CNC Machinist Calculator UltraHome › G-codes › Swiss (Citizen Star)
Swiss (Citizen Star) G-code list
54 G-codes. Pick a code for the format, the addresses, an example program and what to watch out for.
| Code | Meaning | Machine |
|---|---|---|
| G00 | Rapid positioning | Lathe |
| G01 | Linear feed move | Lathe |
| G02 | Circular move clockwise | Lathe |
| G03 | Circular move counterclockwise | Lathe |
| G04 | Dwell | Lathe |
| G12.1 | Polar coordinate interpolation on | Lathe |
| G13.1 | Polar coordinate interpolation off | Lathe |
| G17 | XY plane select | Lathe |
| G18 | XZ plane select | Lathe |
| G19 | YZ plane select | Lathe |
| G20 | Inch input | Lathe |
| G21 | Metric input | Lathe |
| G28 | Return to reference point | Lathe |
| G32 | Single pass threading | Lathe |
| G40 | Nose radius compensation cancel | Lathe |
| G41 | Nose radius compensation left | Lathe |
| G42 | Nose radius compensation right | Lathe |
| G50 | Max spindle speed and coordinate set | Lathe |
| G65 | Macro call | Lathe |
| G68 | Balance cut or double turret mirror on (Star) | Lathe |
| G69 | Balance cut or mirror off (Star) | Lathe |
| G70 | Finish turning cycle | Lathe |
| G71 | Rough turning cycle | Lathe |
| G72 | Rough facing cycle | Lathe |
| G73 | Pattern repeat cycle | Lathe |
| G74 | Face peck drilling and grooving cycle | Lathe |
| G75 | Grooving cycle in X | Lathe |
| G76 | Multiple pass threading cycle | Lathe |
| G80 | Drilling cycle cancel | Lathe |
| G83 | Face drilling cycle | Lathe |
| G84 | Face tapping cycle | Lathe |
| G87 | Side drilling cycle | Lathe |
| G88 | Side tapping cycle | Lathe |
| G90 | OD turning cycle | Lathe |
| G92 | Threading cycle | Lathe |
| G94 | Face turning cycle | Lathe |
| G96 | Constant surface speed | Lathe |
| G97 | Constant RPM | Lathe |
| G98 | Feed per minute | Lathe |
| G99 | Feed per revolution | Lathe |
| G113 | Spindle synchronization cancel (Citizen) | Lathe |
| G114.1 | Spindle synchronization (Citizen) | Lathe |
| G114.2 | Tool spindle synchronization, polygon (Citizen) | Lathe |
| G115 | Start point timing wait type 1 (Citizen) | Lathe |
| G116 | Start point timing wait type 2 (Citizen) | Lathe |
| G117 | M code output during axis move (Citizen) | Lathe |
| G600 | Machining mode cancel (Citizen) | Lathe |
| G610 | Gang tool and front machining mode (Citizen) | Lathe |
| G620 | Simultaneous front ID and OD mode (Citizen) | Lathe |
| G630 | Front and back parallel machining (Citizen) | Lathe |
| G640 | Three system simultaneous machining (Citizen) | Lathe |
| G650 | Pick-off and support mode (Citizen) | Lathe |
| G814 | Spindle synchronization (Citizen) | Lathe |
| G999 | Last part at end of bar (Citizen) | Lathe |
Take the list to the machine. The app searches every code by number or shop word and decodes a whole program line by line.
Open the G-code list Swiss M-codes