CNC Machinist Calculator UltraHome › G-codes › Swiss (Citizen Star) › G01
G01 Linear feed move
Swiss (Citizen Star) G-code · Lathe
Feeds in a straight line at the F rate. With G99 F is inches per revolution, the normal mode for Swiss turning.
Format
G01 X Z F [,C] [,R]
Addresses
| Address | What it does |
|---|---|
X Z | End point. X is diameter |
F | Feed, inches per rev in G99 |
,C ,R | Corner chamfer or radius on Citizen Mitsubishi controls |
How it works
Modal, group 01.
Example program
G00 X.375 Z-.02 T0100 (TOOL 1 OD TURN)
G01 Z.75 F.002 (TURN .375 DIA)
X.5 ,C.015 (FACE UP WITH CHAMFER)
G00 X.55 (CLEAR)
G01 Z.75 F.002 (TURN .375 DIA)
X.5 ,C.015 (FACE UP WITH CHAMFER)
G00 X.55 (CLEAR)
Example is in inch. Check offsets and clearances first.
Watch out for
- Long Swiss parts are turned close to the guide bushing. Keep the cut within about one diameter of the bushing for best finish.
- Corner chamfer and radius words differ. Mitsubishi uses ,C and ,R. Fanuc uses C and R with a parameter.
Related codes
G01 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Linear interpolation at feed rate |
| Haas NGC | Linear interpolation feed motion |
| Mazak (EIA) | Linear interpolation, feed move |
| Okuma OSP | Linear interpolation |
| Mitsubishi M70 M80 | Linear feed move |
| Brother Speedio | Linear interpolation |
| Siemens 840D 828D | Linear interpolation at feed rate |
| Heidenhain TNC (ISO) | Straight line at feed rate, Cartesian |
| Fagor 8055 8065 | Linear interpolation |
| LinuxCNC Tormach | Linear feed move |
| Mach3 Mach4 | Linear feed move |
| Centroid CNC12 Acorn | Linear feed move |
| Hurco WinMax (NC) | Linear feed move |
| Fadal | Linear interpolation at feed |
Every G-code for Swiss (Citizen Star) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G01 in the app All Swiss G-codes