CNC Machinist Calculator UltraHome › M-codes › Hurco WinMax (NC) › M194
M194 Set maximum rapid rate
Hurco WinMax (NC) M-code · Mill
Limits the rapid rate for the program, for proving out or for a tall setup.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M194 :value
Addresses
| Address | What it does |
|---|---|
:value | Maximum rapid rate in the active units per minute |
How it works
Modal.
Example program
M194:200 (MAX RAPID 200 IPM)
G00 X10. Y5. (SLOWER RAPID)
G00 Z1. (RETRACT)
G00 X10. Y5. (SLOWER RAPID)
G00 Z1. (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- The help shows the example as M94:5080, which looks like a typo for M194. Test the exact form on your control.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
Every M-code for Hurco WinMax (NC) in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M194 in the app All Hurco WinMax M-codes