CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G50
G50 Controlled corner rounding
Fagor 8055 8065 G-code · Mill and lathe
Like G05 but waits until the axes are inside machine parameter INPOSW2 before the next block. Corner error stays under that limit at any feed.
Format
G50
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal. Replaced by G05, G07 or G51.
Example program
G91 G01 G50 Y2.75 F40.0 (CONTROLLED CORNER MODE)
X3.5 (CORNER WITHIN INPOSW2)
G90 G07 (SQUARE CORNER AGAIN)
X3.5 (CORNER WITHIN INPOSW2)
G90 G07 (SQUARE CORNER AGAIN)
Example is in inch. Check offsets and clearances first.
Watch out for
- Good middle ground between G05 speed and G07 accuracy.
- On 8060 and 8065, G50 is listed as semi rounded corner. Check the manual.
Related codes
G50 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Scaling cancel |
| Haas NGC | Scaling cancel |
| Mazak (EIA) | Scaling cancel, machining center |
| Okuma OSP | Scaling cancel |
| Mitsubishi M70 M80 | Scaling cancel |
| Brother Speedio | Scaling cancel |
| Mach3 Mach4 | Scaling cancel |
| Centroid CNC12 Acorn | Scaling and mirroring off |
| Hurco WinMax (NC) | Scaling cancel |
| Fadal | Ramp slope control cancel |
| Swiss (Citizen Star) | Max spindle speed and coordinate set |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G50 in the app All Fagor 8055 8065 G-codes