CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G05
G05 Round corner
Fagor 8055 8065 G-code · Mill and lathe
The next block starts as soon as the current one is interpolated, without waiting for in position. Gives smooth fast paths with slightly rounded corners.
Format
G05
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal. Replaced by G07, G50 or G51. Default G05 or G07 is set by machine parameter ICORNER.
Example program
G91 G01 G05 Y2.75 F40.0 (ROUND CORNER MODE)
X3.5 (CORNER IS ROUNDED BY THE FEED)
G90 G07 (BACK TO SQUARE CORNER)
X3.5 (CORNER IS ROUNDED BY THE FEED)
G90 G07 (BACK TO SQUARE CORNER)
Example is in inch. Check offsets and clearances first.
Watch out for
- Corner error grows with feed rate. Use G07 or G50 for sharp corners.
- On 8060 and 8065, G05 is listed as controlled corner rounding, not the 8055 round corner.
Related codes
G05 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Mazak (EIA) | High speed machining mode |
| Mitsubishi M70 M80 | High speed high accuracy control II and III |
| Heidenhain TNC (ISO) | Arc without direction, Cartesian |
| LinuxCNC Tormach | Cubic spline |
| Fadal | Non modal rapid travel |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G05 in the app All Fagor 8055 8065 G-codes