CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G76
G76 Probing move while touching
Fagor 8055 8065 G-code · Mill and lathe
Moves at feed until the probe stops touching, then stops. Used to back off from a contact point.
Format
G76 X..C F
Addresses
| Address | What it does |
|---|---|
X..C | End point if contact is not lost |
F | Feed |
How it works
Not modal.
Example program
G75 Z-0.5 F10.0 (PROBE DOWN UNTIL TOUCH)
G76 Z0 F2.0 (BACK OFF UNTIL RELEASE)
G00 Z1.0 (RETRACT)
G76 Z0 F2.0 (BACK OFF UNTIL RELEASE)
G00 Z1.0 (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- Use a slow feed for repeatable readings.
Related codes
G76 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Fine boring cycle |
| Haas NGC | Fine boring cycle |
| Mazak (EIA) | Fine boring cycle |
| Okuma OSP | Fine boring cycle |
| Mitsubishi M70 M80 | Fine boring cycle |
| Brother Speedio | Fine boring cycle |
| LinuxCNC Tormach | Lathe multi pass threading |
| Mach3 Mach4 | Fine boring, Mach4 |
| Centroid CNC12 Acorn | Fine boring cycle |
| Hurco WinMax (NC) | Fine boring with orient |
| Fadal | Fine boring with oriented shift |
| Swiss (Citizen Star) | Multiple pass threading cycle |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G76 in the app All Fagor 8055 8065 G-codes