CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G75
G75 Probing move until touch
Fagor 8055 8065 G-code · Mill and lathe
Moves the axes at feed until the probe signal comes on, then stops. The touch point is stored in variables for measuring.
Format
G75 X..C F
Addresses
| Address | What it does |
|---|---|
X..C | End point if no touch |
F | Probing feed |
How it works
Not modal.
Example program
G00 G90 X1.0 Y1.0 Z0.5 (ABOVE PART)
G75 Z-0.5 F10.0 (PROBE DOWN UNTIL TOUCH)
G00 Z1.0 (RETRACT)
G75 Z-0.5 F10.0 (PROBE DOWN UNTIL TOUCH)
G00 Z1.0 (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- If the probe never touches, the control shows an error at the end point.
- G76 is the reverse: it moves until the probe stops touching.
Related codes
G75 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | OD and ID peck grooving cycle |
| Haas NGC | OD and ID grooving cycle |
| Mazak (EIA) | X axis grooving cycle |
| Okuma OSP | Automatic chamfering |
| Mitsubishi M70 M80 | Longitudinal cut-off and grooving cycle |
| Siemens 840D 828D | Fixed point approach |
| Centroid CNC12 Acorn | OD or ID groove peck cycle |
| Hurco WinMax (NC) | Multi quadrant arc mode (BNC) |
| Fadal | Tapping head cycle |
| Swiss (Citizen Star) | Grooving cycle in X |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G75 in the app All Fagor 8055 8065 G-codes