CNC Machinist Calculator UltraHome › G-codes › Fagor 8055 8065 › G95
G95 Feed per revolution
Fagor 8055 8065 G-code · Mill and lathe
F is in inches per revolution in G70 or millimeters per revolution in G71.
Format
G95
Addresses
| Address | What it does |
|---|---|
None | No addresses |
How it works
Modal. Replaced by G94.
Example program
G95 G70 (FEED PER REV, INCH)
G01 Z-1.0 F0.008 (0.008 INCH PER REV)
G00 X2.0 (CLEAR)
G01 Z-1.0 F0.008 (0.008 INCH PER REV)
G00 X2.0 (CLEAR)
Example is in inch. Check offsets and clearances first.
Watch out for
- Lathes normally run G95.
- If the spindle stops, feed per rev motion stops too.
Related codes
G95 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Feed per revolution |
| Haas NGC | Feed per revolution mode |
| Okuma OSP | Feed per revolution |
| Mitsubishi M70 M80 | Feed per revolution |
| Brother Speedio | Feed per revolution |
| Siemens 840D 828D | Feed per spindle revolution |
| LinuxCNC Tormach | Feed per revolution |
| Mach3 Mach4 | Feed per revolution |
| Hurco WinMax (NC) | Feed per revolution |
Every G-code for Fagor 8055 8065 in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G95 in the app All Fagor 8055 8065 G-codes