CNC Machinist Calculator UltraHome › M-codes › Brother Speedio › M19
M19 Spindle orientation
Brother Speedio M-code · Mill
Stops the spindle at a fixed angle. Used to set boring bars and for setups.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
M19
How it works
Non-modal.
Example program
M05 (SPINDLE STOP)
M19 (ORIENT SPINDLE)
M00 (SET BORING BAR TIP)
M19 (ORIENT SPINDLE)
M00 (SET BORING BAR TIP)
Example is in inch. Check offsets and clearances first.
Watch out for
- G76 orients the spindle itself, so M19 is not needed for it.
Related codes
M19 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Spindle orientation |
| Haas NGC | Orient spindle |
| Doosan (Fanuc) | Left spindle orientation |
| DMG Mori MAPPS (Fanuc) | Spindle orientation |
| Mazak (EIA) | Spindle orientation position (for the robot to insert a workpiece) |
| Okuma OSP | Spindle orientation (Lathes & Mills) |
| Mitsubishi M70 M80 | Spindle orientation |
| Siemens 840D 828D | Spindle positioning |
| Fagor 8055 8065 | Spindle orientation |
| LinuxCNC Tormach | Spindle orient |
| Mach3 Mach4 | Spindle orient |
| Centroid CNC12 Acorn | Spindle orient, macro |
| Hurco WinMax (NC) | Spindle orient |
| Fadal | Spindle stop and orient |
Every M-code for Brother Speedio in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M19 in the app All Brother Speedio M-codes