CNC Machinist Calculator UltraHome › M-codes › Centroid CNC12 Acorn › M19
M19 Spindle orient, macro
Centroid CNC12 Acorn M-code · Mill and lathe
Has no default action. If the builder wrote an M19 macro it turns the spindle to the orient position. Needed for G76 fine boring.
Verify on your machine. This entry could not be fully checked against the maker manual. Check your machine manual before you run it.
Format
Addresses
| Address | What it does |
|---|---|
none | No words |
How it works
One shot.
Example program
M19 ; ORIENT THE SPINDLE
M0 ; LOAD THE BORING BAR
Example is in inch. Check offsets and clearances first.
Watch out for
- Without an mfunc19.mac file and an orient capable drive, M19 will not work.
Machine builders set many M codes, and they change by model and options. Check the M code list for your machine.
Related codes
M19 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Spindle orientation |
| Haas NGC | Orient spindle |
| Doosan (Fanuc) | Left spindle orientation |
| DMG Mori MAPPS (Fanuc) | Spindle orientation |
| Mazak (EIA) | Spindle orientation position (for the robot to insert a workpiece) |
| Okuma OSP | Spindle orientation (Lathes & Mills) |
| Mitsubishi M70 M80 | Spindle orientation |
| Brother Speedio | Spindle orientation |
| Siemens 840D 828D | Spindle positioning |
| Fagor 8055 8065 | Spindle orientation |
| LinuxCNC Tormach | Spindle orient |
| Mach3 Mach4 | Spindle orient |
| Hurco WinMax (NC) | Spindle orient |
| Fadal | Spindle stop and orient |
Every M-code for Centroid CNC12 Acorn in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open M19 in the app All Centroid CNC12 Acorn M-codes