CNC Machinist Calculator UltraHome › G-codes › Brother Speedio › G01
G01 Linear interpolation
Brother Speedio G-code · Mill
Cuts in a straight line at the programmed feed rate F.
Format
G01 X Y Z F
Addresses
| Address | What it does |
|---|---|
X Y Z | End point of the cut |
F | Feed rate in inches per minute |
How it works
Modal, motion group. F stays active until changed.
Example program
G00 X-.5 Y0 Z.1 (START OFF THE PART)
G01 Z-.2 F15. (FEED TO DEPTH)
X3. F30. (CUT ALONG X)
G00 Z1. (RETRACT)
G01 Z-.2 F15. (FEED TO DEPTH)
X3. F30. (CUT ALONG X)
G00 Z1. (RETRACT)
Example is in inch. Check offsets and clearances first.
Watch out for
- A G01 without any F earlier in the program gives an alarm.
- Check that F is in IPM when G94 is active.
Related codes
G01 on other controls
The same number can mean something different on another control.
| Control | Meaning |
|---|---|
| Fanuc | Linear interpolation at feed rate |
| Haas NGC | Linear interpolation feed motion |
| Mazak (EIA) | Linear interpolation, feed move |
| Okuma OSP | Linear interpolation |
| Mitsubishi M70 M80 | Linear feed move |
| Siemens 840D 828D | Linear interpolation at feed rate |
| Heidenhain TNC (ISO) | Straight line at feed rate, Cartesian |
| Fagor 8055 8065 | Linear interpolation |
| LinuxCNC Tormach | Linear feed move |
| Mach3 Mach4 | Linear feed move |
| Centroid CNC12 Acorn | Linear feed move |
| Hurco WinMax (NC) | Linear feed move |
| Fadal | Linear interpolation at feed |
| Swiss (Citizen Star) | Linear feed move |
Every G-code for Brother Speedio in your pocket. The app has the full example programs, search by number or shop word, a line decoder and calculators for tapping, threading and drilling.
Open G01 in the app All Brother Speedio G-codes